ALL PiBOX CAPTURE CARDS (SEE BELOW FOR YOUTUBE VIDEO)

Please use the below steps for installation for All video capture cards: 

Step 1: Download and Install OBS

If you haven’t already, download and install OBS from the official website (https://obsproject.com/). Follow the installation wizard instructions.

Step 2: Open OBS and Set Up a New Scene

1. Open OBS after installation.
2. Click on the “+” under the “Scenes” box to create a new scene.
3. Name your scene and click “OK.”

Step 3: Add a Source

1. Click on the “+” under the “Sources” box to add a source.
2. Choose the appropriate source type. For a PiBOX Video Capture Card, select “Video Capture Device.”
3. Name your source and click “OK.”

Step 4: Configure PiBOX Video Capture Device

1. In the “Device” dropdown menu, select your PiBOX Video Capture Card.
2. Set the resolution and frame rate according to your preferences or the specifications of your video source.
3. Click “OK.”

Step 5: Adjust Audio Settings (If Necessary)

If your PiBOX Video Capture Card has audio, you may need to configure the audio settings:

1. Click on the gear icon next to the “Mixer” box.
2. Ensure the correct audio source is selected.

Step 6: Configure Output Settings

1. Go to the “Settings” menu by clicking on the “Settings” button at the bottom right.
2. In the Settings menu, navigate to the “Output” tab.
3. Choose your preferred streaming or recording settings. Common choices include streaming to platforms like Twitch or recording to your computer.

Step 7: Configure Video Settings

1. In the Settings menu, go to the “Video” tab.
2. Set your base and output resolution. Ensure they match the settings you’ve configured for your PiBOX Video Capture Card.
3. Set the desired FPS (frames per second) for your stream or recording.

Step 8: Test Your Setup

1. Go back to the main OBS window.
2. Click “Start Streaming” to test your setup. If you’re not streaming, click “Start Recording” to test the recording functionality.

Step 9: Adjust as Needed

Monitor your stream or recording to ensure the video and audio quality are satisfactory. Make adjustments as needed in OBS settings or on your PiBOX Video Capture Card.

Step 2.1: Configure PiBOX Video Capture Device for 1080p at 60Hz

1. Click on the “Sources” box in OBS.
2. Right-click on your PiBOX Video Capture Card source under “Sources” and select “Properties.”
3. In the “Properties” window, find the “Resolution/FPS Type” dropdown menu.
4. Choose “Custom” from the dropdown menu.
5. In the “Custom Resolution/FPS Settings,” set the resolution to 1920×1080.
6. Adjust the “Common FPS Values” dropdown to 60.
7. Click “OK” to apply the changes.

Delta Step 2.2: Configure PiBOX Video Capture Device for YUV Format

1. In OBS, click on the “Sources” box.
2. Right-click on your PiBOX Video Capture Card source and select “Properties.”
3. Look for a setting related to video format or color space.
4. Choose YUV as the preferred format if available.
5. Click “OK” to apply the changes.

Advantage over MJPEG:

Recording in YUV format offers better compression efficiency compared to MJPEG, resulting in smaller file sizes without compromising much on image quality. This means you can save storage space while maintaining a high-quality recording.

For a reference:It should be within 170ms. [Note: This will depend on the processor and the other applications running]

Gen3 2024 Models: These units has a impressive ~50 – 70 ms latency. 

This depends on your PC config and if its Intel I5 – 7th Gen or higher as there is processing power that plays a role in this. Please close background applications to see improvement in latency on slower processors

Check if your phone supports video out. Connect phone directly to a TV and see if it works. Refer: Pibox.in/willcwork.
Alternatively.. Check any other working hdmi device-Laptop/Set top box etc – to this HDMI device and see if that works. This will allow you to troubleshoot settings.

OBS is the most famous and can be downloaded from – https://obsproject.com/download.

You can also try OBS Lite, VLC, Xsplit and DemoCreator.

Allocate higher CPU priority to OBS. Check background processes and make sure no other applications are using resources. If its a older CPU try low PC settings.

Its normal to see the device warm. We are using the vents to bring out the heat.

The VC202 and 2023 series runs a little warm but we have optimised heat dissipation. 

GEN3 – 2024 Model : Runs relatively at about only 30% of the operating temperature.

No. This can only do Video capture using the HDMI Input. The HDMI port on this is only for input.

[HDMI ports are usually input/output single function units]

Please refer the below settings: